Packaging: Available in 50 lb bags.

Gilsonite is a natural hydrocarbon additive used for filtrate loss control and shale stability in oil based drilling fluids. Its high molecular weight distribution gives it a softening point significantly higher than conventional polymers, allowing it to deform and seal under downhole conditions rather than melting into a low-viscosity liquid.

Packaging: Available in 5-gal pails, 55-gal drums, and 275-gal IBC tote tanks.

MDF LERM is a complex blend of dimer and trimer acids engineered to improve rheological and suspension characteristics across all base fluid systems. It increases low-shear viscosities and gel strengths for improved hole cleaning, enabling high rates of penetration while maintaining wellbore stability.

Packaging: Available in 5-gal pails, 55-gal drums, 275-gal IBC totes, 330-gal IBC totes, and bulk transport loads.

MDF MUL I is a modified crude tall oil formulation in diesel designed to create stable water-in-oil emulsions across refined or crude oils, esters, ethers, synthetics, and mineral oil base systems. It lowers interfacial tension between oil and brine, stabilizes emulsions, and supports gauge hole drilling in shale and clay formations with improved penetration rates.

Packaging: Available in 5-gal pails, 55-gal drums, 275-gal IBC totes, 330-gal IBC totes, and bulk transport loads.

Concentrated tall oil fatty acid in a polyamide solution in diesel. It tightens emulsion stability, ensures solids are oil-wet, and keeps filtrate water-free in synthetic oils, ethers, esters, polyolefins, internal olefins, and calcium or sodium brine systems. Best used in combination with MDF MUL I for a complete, stable emulsion system in shale and clay drilling applications.

Packaging: Available in 5-gal pails, 55-gal drums, and 275-gal IBC tote tanks.

High-performance invert oil based mud thinner effective in high-weight drilling mud systems where excessive gel strengths compromise circulation and drilling efficiency. It reduces gel strength without adversely affecting other mud properties and has demonstrated improvement in HTHP fluid loss in select applications.

Packaging: Available in 5-gal pails, 55-gal drums, 275-gal IBC totes, 330-gal IBC totes, and bulk transport loads.

Amido imidazoline formulation blended in diesel designed to promote rapid oil-wetting of drill solids and barite in oil based drilling fluid systems. It prevents loss of favorable mud rheology caused by water-wet solids and water influx, and enhances the performance of both primary and secondary OBM emulsifiers. Compatible with linear paraffins, esters, and synthetic olefins.

Packaging: Available in 5-gal pails, 55-gal drums, and 275-gal IBC totes.

Enhanced wetting agent built on vegetable extract chemistry, offering improved oil-wetting performance compared to conventional formulations. Fully compatible with all commonly used base oils including diesel, linear paraffins, esters, and synthetic olefins. Designed for high mud weight and high-temperature applications where standard wetting agents fall short.